谁能给我翻译下面的400字左右的文章？

作者&投稿：钟莉（联系方式在网页底部的电邮联系）

谁能帮我把下面的摘要翻译成400左右字的英语~

With the progress of science and technology, people living in the superstition less for religious thought, the more rational. But in the ethnic culture, there are still a lot of superstition and religious factors, they are an important part of traditional festival. For example, China's ancestor and western Halloween. Halloween celebration of Halloween is every year and two big religious holiday. They reflect the people to the body after the death of the ghost, also contain the attitude of mind chained people dogma. This paper tries to compare with Halloween on Halloween, two festival reflects the superstition, religious thought, discusses the differences between Chinese and western culture background of different superstition, religious thought and religious festivals.
As the three parts. The first part introduces Halloween celebration of Halloween and origin and ways. The second part of the western countries in induction of superstition. In the third part of the analysis, the influence of superstition and Buddhism, Taoism, the Christian religion on the three kinds of death and the soul of the ideas and beliefs. The fourth part discusses the reasonable attitude towards these phenomena, i.e., raise awareness of science of superstition.

近年来,随着中美文化交流频繁和美国影视作品在中国的受众程度提高,文化语境对翻译的影响力日益凸现出来。文化差异的存在导致人们对于同一事物或概念产生不同的理解和解释。因此作为非语言语境的重要分支,文化语境对于翻译活动的影响不可小视。
作文400字,翻译,重要性
近年来,随着中美文化交流频繁和美国影视作品在中国的受众程度提高,文化语境对翻译的影响力日益凸现出来。文化差异的存在导致人们对于同一事物或概念产生不同的理解和解释。因此作为非语言语境的重要分支,文化语境对于翻译活动的影响不可小视。

万无那么多语病，在线翻译的出来个屁。

The Mould Industry is the Basic industries of the National economy,and the Plastic mold is also the overlord of the whole of the Mould Industry.The Plastic Mould design in china,with the relatively late technology,the low level,but with the rapid development in recent years.At present,the mold that has monotypic cavity take more than 80% of market,and take the dominance.
The Plastics Industry is one of the fastest growing industries,and the Injection mold is one of the types of rapid development,The demand of plastic mold has been increasing at home.At the same time,the studies of injection mold have great significance for understanding the production of plastic products and improving the quality of product.
The design,by referencing structures of many kinds of similar plastic mold,is polypropylene plastic parts,and is used a two-cavity injection molding.Using the point gate injection,the cavity is made of two sliders.When opening the mold,using the continuous stripping agency to divide into scrap and product,and then using the slider and the putting to push out products in a distance.After the putting pushes out products in a distance,use the artificial or machine to take out the product.When close the model,Using the interaction between the templates and slider、the slider and putting to make mold return.
Through the design,we can consolidate the knowledge learned, find out the die structure and the work further,understand the injection mold further,get the satisfactory results,and reach the design intent expected.

我帮你改了语病，分要加起哈。

Mould industry is the national economy key industries , the plastic mould can't be mould industry hegemon entire but. Plastic molding and processing design for die and mould , comparison making a technology of our country are late, overall level comparatively low, development the past few years is comparatively prompt but. Shan type cavity mould reaches more than 80% at present, still hold a leading post. Plastics industry is to increase one of the quickest industry category in the world nowadays, but produce plastic articles by injection moulding the mould is quicker kind develop among them, amounts in the homeland need escalation to plastic mould. The mould at the same time is studied producing plastic articles by injection moulding has very big meaning to knowing plastic product procedure of production and raising product quality. Owe the structure designing the mould by moulding a document to various similarity a reference, designing that is that polypropylene moulds a document , adopting is one model two cavities injection molding. Make use of a running gate to get a shot, the type cavity has two smooth piece made up of. Making use of in a row deciduate organization when dying sinking, makes a running gate pour system curdling to expect parting from to moulding piece of automation for , certain distance promotes products again from smooth piece and the armature pusher , think that the armature pusher drives smooth piece to split the certain distance queen , make use of manpower or machine hand take out mould a document. When closing a model make use of form board to reset mould with the coactions between smooth piece , smooth piece and armature pusher. The design passing a mould, consolidates what be learned knowledge , knows mould structure and operating principle further, the mould has had deeper single-step cognition to producing plastic articles by injection moulding , has got comparatively satisfied effect , has reached expected design intention. Keywords: Produce plastic articles by injection moulding the model , the running gate, continue demould , smooth piece

Mold industry is the foundation of the national economy, and industrial plastic mold and die industry of the empire. Our plastic molding design, production technology, overall level is low, but the recent development is rapid. Currently single cavity mould reaches 80%, is still dominant.
Plastic industry in the world today is one of the fastest growing industrial categories and injection mould is one of the types of rapid development of plastic mold, domestic demand increases ceaselessly. To understand and study of plastic injection mold production process and improve product quality has great significance.
The design of similar parts by reference to the design of die structure, polypropylene plastic parts, use is a two cavities injection molding. Using some runner injection mold, two slider. Open mode of continuous demoulding mechanism, make some runner gating system of automatic feeding and plastic parts, again from the slider and putting some distance, when putting out slider to promote a certain distance apart after using artificial or remove molded parts. The robot When using the template and mould slider, slider and putting the interaction between the reset to die.
Through the mould design, consolidate the knowledge, the further understanding of mould structure and working principle of injection mold, with the deeper understanding and satisfactory effect, achieve the desired design intent.

Keywords: injection mold, point, continuous stripping, slider, design

Mold industry is the basis of national economy，while the plastic mold is outstand from the whole mold industry. For the plastic mold design of our country, the manufacture technology is relatively late, and the overall level is relatively low, but the development is rapid in recent years.Currently, single-cavity mold still occupies the lead position with a percentage of more than 80%.

生活记录网

谁能给我翻译下面的400字左右的文章？

相关热门