求高手在线翻译机械英语
The above methods are all based on image analysis.
上述方法都是基于图像分析。
There are several traditional, non-image based methods for quantification of internal granule structure.
有几种传统的,非基于图像的量化内部颗粒结构方法。
These methods include pycnometry [27], mercury porosimetry [19,28,29], nitrogen adsorption technique or
这些方法包括pycnometry、汞porosimetry[27](19、28、29]、氮气吸附技术或
BET analysis [28,30] and Inverse Gas Chromatography, IGC, [31].
BET分析[28,30]以及反气相色谱仪,或IGC[31]。
Acquiring the internal granule structure by modern methods, such as image-based techniques, is often costly due to operating and capital costs of equipment such as X-ray micro-tomography (XMT), Magnetic Resonance Imaging (MRI), and Transmission Electron Microscopy(TEM).
用现代的方法获取内部颗粒结构,如影像学技术,往往是昂贵的,由于操作及资金成本，如x射线micro-tomography(XMT)、磁共振成像(MRI)和透射电子显微镜等设备(TEM)。
However, these are more accurate and give more information which cannot otherwise be obtained by the traditional methods.
然而,这些都是更准确的，给出的信息更多, 这些信息也无法用传统方法获得的。
XMT has been used in the field of granulation technology for analysis of the internal structure of granules [19] and tablets [32], external particle shape [33] and characterisation of agglomerate structure for DEM
XMT已被用于颗粒技术领域，分析颗粒(19]和片剂[32]的内在结构外部颗粒形状,[33]和DEM的结块性结构特征
simulations [14].
模拟[14]。
An important challenge of the granulation technology is to produce consistent granule structure and shape which in turn lead to more uniform properties such as strength and dissolution rate.
颗粒技术上的一个重要的挑战是生产出结构和形状一致的颗粒，从而得到更均匀的性质,如强度、溶解率。
This is difficult without introducing a method to quantify the granulestructure.
如果没有一个定量研究颗粒结构的方法，这将是非常困难的。
In this paper we use some structure descriptors such as chord length distribution and phase function to enable quantification of internal structure of granules.
在本文中,我们使用一些结构描述符,如弦长分布和相位函数, 从而量化颗粒的内部结构。
The characterisation of granule strength [34–39] and structure [14] has previously been reported.
各种颗粒的强度[34-39]和结构的特征[14]过去曾有过报告。
However, there is no work on the effect of different operating conditions, such as impeller speed on the internal granule structure.
然而,没有关于不同的操作条件对工作的影响,如叶轮速度对内部颗粒结构的影响的报告。
The objective of this work is to acquire the internal structure of granules by high resolution X-ray microtomography and to analyse it using a software package developed by Stepanek et al. [40].
本文的目的是利用高分辨x射线microtomography获得颗粒的内部结构，并使用一个由Stepanek 等人开发的软件来分析它。【40]。
The granules used in this work were produced at three different impeller speeds in a high shear granulator.
这项工作使用的颗粒是在三种不同速度的叶轮高剪切造粒下产生的。
你要的是机械翻译吗，我这里有
queeze bottle cap injection mould design
In this paper,
This topic research extrusion type cap injection mould design.Extrusion type cap used in cosmetics bottle caps, for plastic, elastic well overall as a trapezoid of rotors, extruding hole for a "7" type hole, in order to improve the production efficiency, the use of a multi-cavity injection mould production.This design USES the latent type runner gating system, does not affect the plastic parts surface.Need to use outer smoke line organization, using the inclined guide pillar, mould opening drive complete horizontal hole forming slider lateral movement.To guarantee the quality of hole wall, extrusion institutions use the push rod, the ejector sleeve joint institutions.In order to take out the plastic pieces, maximize parting surface is located at the exterior outline, using the small core, and the parting surface gap exhaust.
Key words: injection mould;Elastic;Latent type gate;The lateral core-pulling.The push rod;Push the tube;
面是由大量的处理这方面的贡献与表面平行的轴线位移之一。差距几何可视化是在瞬间完成的时间。...】
内容是：（其中一个最重要的部分,即双螺杆压缩机螺杆机或扩张器,是一个工作空间边界表面所产生的表面和内部圆柱体表面牙齿的机箱。这一贡献交易的分析,正确的和不正确的牙齿接触而创造出机转子螺杆的表面。两个共轭曲面曲线相互接触的正确的接触。接触变化曲线的孤立点的接触不正确的公司。） 希望能帮到你！
其中一个最重要的部分,即螺杆压缩机螺杆机或扩张器,是一个工作空间边界表面所产生的表面和内部缸牙齿表面的机箱。这一贡献进行正确的和不正确的分析与牙齿的双螺杆机转子表面产生。两个共轭曲面曲线相互接触的正确的接触。曲线变化的联系接触隔离分不正确的联系。创造一个技术差距共轭曲面不良都是一种后果的这种变化。不正确的联系的
表面是引起的位移大轴平行的表面处理,在这种贡献。几何成像的差距进行瞬时时间。
相关视频
求英语高手翻译机械专业类英语
一、Vocabulary （翻译机械工程） （20 点 1 点）1.精密铸造 2。自动 3。陶瓷4.凸轮 5。普通车床 6。铸铁7.回火 8。铜 9。钢包10.液压系统 11。钻井 12。合金13.四氯化 14。半螺母 5。麻花钻16.强度 17。18 的表面光洁度。公差19.工具邮政 20。运输二、Translate 以下 sentences（60 点、...
机械英语翻译
全自动电控平台 Full-automatic automatically controlled platform 凸面雕刻机 Convex carving machine 真空固化流水线 The vacuum solidifies the assembly line 全自动砂光机 Full-automatic grinder 全自动光UV固化机 Full-automatic mere UV solidifying machine 全自动锯床 Full-automatic sawing machine 全...
机械英语
holder,on 皮带头部固定，开 23.SBH to feeding pos. SBH到送带（进料）位置 24.strap guide open position 皮带指导打开位置 25.carriage to home position 传送到原位 因为比较专业，也没有说明是该机械是做什么工作的。只能猜测，大概是这样的意思。楼主可以参考一下，结合自己的理解再修改。Recomme...
专业英语 请高手帮忙翻译(在线等)
炉 （补充一下，有很多种，专业的有台车炉、高精度数字控制氮化炉，你翻译成工业炉比较好）气柜负荷站手册探测器vac.tweezer自旋式干燥机湿式洗涤器涂布机主电源盒涂清凉板温度控制器发展自旋马达控制器洁净烘箱vac.tweezer 翻不出来，不过vac可以翻译成吸尘器，而且是需要真空的那种，tweezer 可以翻译成...
工程机械专业英语翻译(高手速来)
"Factory branch"——制造厂 （means a branch office maintained by a person who manufactures or assembles motor vehicles for the sale of motor vehicles to distributors, for the sale of motor vehicles to motor vehicle dealers, or for directing or supervising in whole or in part its ...
